Please enter your contact, our managers will contact you as soon as possible

Retail Wholesale OEM

Products / Commercial & Industrial Heating / Self-Regulating Heating Cables

15-25W/m, cable length up to 136m

Self-regulating electrical heating tape for freeze protection or temperature maintenance of pipelines and vessels even in hazardous areas.

  • Automatically adjusts heat output subject to any temperature change
  • Can be cut to required length
  • Not overheat or burnout even if overlapped
  • Full range of controls and accessories
  • Approved for use in safe, hazardous and corrosive environments
  • Operating voltage 220-240 VAC (on request 110-120 VAC)



HTA is an industrial grade self-regulating heating tape that can be used for freeze protection or temperature maintenance of pipelines and vessels.

It can be cut to length on site and exact piping length can be matched without any complicated design considerations.

Internal matrix insulation forming with it a single unit provides additional protection against moisture.

HTA is certified for use in safe and explosion hazardous environments against international standards as well as GOST R 60079 standards.

Its self-regulating characteristics improve safety and reliability. HTA will not overheat or burnout even when overlapped upon itself. The heat output adjusts automatically subject to temperature change.

The installation of HTA heating tape is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in kits.


Thermoplastic elastomer outer jacket over tinned copper braid ensures additional protection.
Fluoroplastic outer jacket over tinned copper braid provides protection where corrosive chemical solutions or vapors may present.


Maximum temperature 65 °C
Maximum allowable temperature de-energized (1000 hours cumulative) 85 °C
Minimum installation temperature - 60 °C
Power supply ~220–240 VAC
(~110–120 VAC on request)
Temperature classification T6
Maximum resistance of the protective braid not more than 10 Ohm/km

Maximum length of a heating section, or overall length of sections of the same type connected in parallel (m) vs circuit breaker type

Type Start-up temperature, °C 230 V
10 A 16 A
15HTA 10 104 136
-15 69 89
-20 58 78
20HTA 10 79 110
-15 49 71
-20 42 58
25HTA 10 60 83
-15 39 56
-20 32 47

For use with type C circuit breakers according to GOST R 50345- 2010 (IEC 60898-1:2003)

* A current step takes place (starting current) at the moment of turning on the heating section. The current value stabilizes within 5 minutes after start-up. Maximum starting current can be 5-6 times higher than the rated current value of the circuit breaker.

Dimensions and weights

Type Nominal dimensions, mm Weight, kg/100 m Minimum bending radius, mm
HTA...BT 10.7 x 6.3 10.96 25
HTA...BP 10.5 x 5.9 11.61 25

* Minimum bending radius is given for temperature –20 °C.

Thermal ratings

Nominal heat output at operating voltage 115 V or 230 V, when self-regulating heating tapes operate in normal conditions.

Ordering information


A range of accessories includes kit of component parts for power supply input, splice and termination of the heating tape and control unit.

We recommend to use original accessories made by SST to ensure trouble-free operation and meet safety standards and requirements.